Programmable Logic Controllers
30 DAY WARRANTY, EXCHANGE OR REFUND OF PURCHASE PRICE ONLY.
GE Fanuc 90-30 Cables
IC647CBL704 Cable - Series PC to 90 WSI Board, length 9ft, 15/37 male pins (1) New) - $40
Cable IC690CBL701 (1) New $40
Cable IC693CBL300A - (5) used $30 each
Cable IC693CBL301A- (11) used $30 each
Cable IC693CBL303A - OUT OF STOCK
Cable IC693CBL303B - (1) used $30 each
Cable IC693CBL305 - (11) used $30
Cable IC693CBL310 - (3) used $30 each
Cable IC693CBL315 -(11) used $30 each
Cable IC693CBL328A - (1) used $25.00
Cable IC693CBL331 A/B (2) @ used $30 each
Cable IC693CBL333B (2) used @ $40.00 each
IC693ACC307 Terminal plug - (11) used @ $20 each
IC693ACC337A block - (4) used @ $35.00 each.
CPU MODULE
GE FANUC IC693CPU351 WITH KEY, USED
Weight: 3 lbs
30 Day Warranty, Rev's available listed below
GE Fanuc IC693CPU351 - Rev EK (25 mHz) - 7 in stock @ $400.00 each
GE Fanuc IC693CPU351 - Rev GN/GR (25 mHz) - 2 in stock @$600.00 each
GE Fanuc IC693CPU351 - Rev FN (25 mHz) - 1 in stock @ $400.00
---------------------------------------------------------------------------------------
GE Fanuc IC693DNM200AB DeviceNet Master, Used.
(1) used @ $576.00 each
Weight 2 lbs. 30 Day Warranty
COMMUNICATION MODULES
IC693CMM301 - (1) New @ $714.00
IC693CMM301 - (3) used @ $400.00
Co-Processor IC693PCM301 - (42) used @ $428.00 each
Co-Processor IC693PCM311 - (12) used @ $720.00 each
High Speed Counter IC693APU300 - (5) used @ 218.00 each
High Speed Counter IC693APU300 - (1) New @ $382..00
INPUT MODULES
- Input - 24Vvdc IC693MDL641 -16 pt, Neg logic - (6) used $112.00 ea
- Input - 24 vdc IC693MDL634B/C-8 pt., Pos/Neg Fast (2) used @ $ 62.00 ea.
- Input - 24 vdc, IC693MDL634 - 8 pt., Pos/Neg Fast. (1) New @ $100.00
- Input - 24VDC IC693MDL644 -16 pt, Neg logic - (7) used $112..00 ea
- Input - 24VDC IC693MDL645 -16 pt, Pos/Neg logic - (23) used $100.00 ea
- Input - 24VDC IC693MDL646 -24 vdc, 16 pt, Pos/Neg logic -(154) used $100.00 ea
- Input - IC693MDL653AA - Type A03B-0806-C107, 24 VDC ISOL, Neg/Pos Logic ,32 pt. (1) NEW @ $400.00
- Input - 24VDC IC693MDL654 -32 pt, Pos/Neg logic - (48) used $200.00 ea
GE Fanuc IC693MDR390C- Input, Used
(3) used @ $130.00 each Weight: 2 lbs.
30 Day Warranty
Input - 24VDC #IC693MDR390C - 24 vdc, 7.5mA, 1 pt. Output relay 2 amp pilot duty, 120/240VAC, 50/60 Hz, 4A Max/ common Out 8 pt.
OUTPUT MODULES
Output - IC693MDL740-12/24VDC,16 pt, 0.5A, Pos logic - (44) used $125.00 each
Output - IC693MDL741 - 12/24VDC,16 pt, Neg logic,0.5A - (128) used $120.00 each
Output - IC693MDL752 - 32 PT (5) used @ $200.00 each
Output - IC693MDL753G - 32 pt (2) used @ $180.00 each.
GE FANUC IC693MDL753 REV F - OUTPUT, NEW
Output - IC693MDL753 - 12/24 VDC, 0.5A, 32 pt, Pos logic - (3) NEW @ $400.00 ea
Weight: 2 lbs.
--------------------------------------------------------------------------------------
ANALOG
- Analog Input IC693ALG220 4 pt. - (20) used $200.00 ea
- Analog Input IC693ALG221 4 pt. - (2) used @ $160.00 each
- Analog Input IC693ALG222 - 16 PT (3) used @ $208.00 each.
GE Fanuc IC693ALG390, used
Analog Output IC693ALG390 - (5) used @ $142.00 each.
- Weight: 2 lbs, 30 Day Warranty
GE FANUC IC693ALG442B, used
Input/Output Analog, used (2) @ $337.00 each. Weight: 2 lbs, 30 DayWarranty
POWER SUPPLY MODULE
GE Fanuc IC693PWR321 Power Supply, Used
(54) Used @ $125.00 each
- Input: 240 vac, 50/60Hz, 125 vdc, 50 W. Output: 24 vdc, 0.8A max, Torque 12 in-lb. Weight: 3 lbs, 30 Day Warranty.
GE FANUC IC800SDM250M2KE25C AC SERVO MOTOR, USED
(16) used @ $850.00 each, SL Series, AC Servo Motor. 3 phase, 200 volt, 14.0 amp, rated output: 2.5 Kw, rated speed: 2000 rpm, nema 56, 24mm diameter keyed shaft.
Weight: 30 lbs. - 30 Day Warranty.
CONTACT AMW REGARDING CONTROLLER AND CONNECTOR CABLING TO PURCHASE SEPARATELY THAT GO WITH THIS UNIT.
---------------------------------------------------------------------------------------
GE FANUC IC800SS1216D2-EE SERVO MOTOR CONTROLLER, USED
(16) used @ $850.00 each
Servo Motor Controller, S2K JR Series, User Manual GFK-1848F, 180-250 VAC, 3 phase, 50-440 Hz, 18.0 amps, 0-1000 Hz> 16Arms continuous/ 32 Arms peak @ Full Load.
Weight: 15 lbs. 30 Day Warranty.
CONTACT AMW REGARDING AC SERVO MOTOR AND CONNECTOR CABLING TO PURCHASE SEPARATELY FOR THIS UNIT
----------------------------------------------------------------------------------
- EXPANSION RACKS ONLY, COMPLETE UNITS ON PAGE 2
- Expansion rack 5 slot IC693CPU311 - Rack (6) used @ $98.00 each
- Expansion rack 10 Slot IC693CHS391 - (22) used $150.00 ea
- Expansion rack 10 Slot IC693CHS392 - (32) used $160.00 ea
- Expansion rack 5 slot IC693CHS398 - (9) used $98.00 ea
-
GE Fanuc 90-70 Cards Available
- Analog Input 8 ch IC697ALG230 (1) used $588.00
- Analog Output 4 ch IC697ALG320 (3) used $568.00 ea
- Cmos Expansion Memory IC697MEM713 64kb (1) NEW $688.00
- Cmos Expansion Memory IC697MEM715 - 128kb (1) used $361.00
- Power Supply IC697PWR711J (1) used @ $428.00.00
Series One GE Fanuc, complete System, used 30 day warranty
GE Fanuc Series One
GE Fanuc Series One complete unit: IC610CHS110 rack, used $ 250.00 - 30 day warranty
w/ power supply, IC610CPU106 (3.7k RAM), 2-Output IC610MDL156A (16pt), 2-Input IC610MDL106 (16pt). Working unit when removed from serive. Weight: 5 lbs.
GE Fanuc Sereis One complete unit: IC610CHS111 rack, used @ $250.00 - 39 day warranty
w/ power supply, IC610CPU106 (3.7k RAM), 2-Output IC610MDL156A (16pt), 2-Input IC610MDL106B (16pt). Working unit when removed from service. Weight: 5 lbs.
GE Fanuc Series One complete unit: IC610CHS111 rack, used @ $250.00 - 30 day warranty
w/ power supply, IC610CPU105 (1k RAM), 2-Output IC610MDL156 (16pt), 2-Input IC610MDL106 (16pt). Includes ribbon. Working unit when removed from serive,Weight: 5 lbs.
GE Fanuc 610 Series, 30 Day Warranty
CPU card - GE Fanuc IC610CPU105 - 1k ram (2) used @ $146.00 ea
Input - 24 VDC - GE Fanuc IC610MDL101 - 8 circuit (4) used @ $42 each.
Input - 24 VDC Model IC610MDL106A- 16 circuit w/LED - (9) used @ $78 ea
Input - Sink Load, 24 vdc, 16 circuits - IC610MDL107B - (1) New @ $110.00
Output - 24 VDC GE Fanuc IC610MDL151- 8 circuit w/ LED (5) used @ $48 ea
GE Fanuc Six Series
- IC600BF801 (2) used $688.00 ea
- IC600BF831k 5-50VDC Input HLIP1 - (5) used $580.00 ea
- IC600BF929k 10-50V Source HLSM1 - (4) used $790.00 ea
- IC600BF941 (1) used @ $1600.00
- IC600BF943 4 channel output analog) (2) used $1610.00 ea
- IC600BF945 28k Ascii Basic I/O - (1) repaired $1256.00
- IC600BF946 (1) used $1323.00
- IC600BF949 28k Ascii I/O - (3) repaired @ $2648.00 ea
- IC600CB500 (7) used $95.00 ea
- IC600CB502C logic control - (4) used $244 ea
- IC600CB503L I/O control - (4) used 80.00 ea
- IC600CB516C comm control(2) used - $127.00 ea
- IC600LR605 (1) used $158.00
- IC600LX605 (3) used $1052.00 ea
- IC600PM503 (1) used $1198.00
- IC600YB813 (1) used $780.00
- IC600YB831 (4) used $133.00 ea
- IC600YB901B (2) New @ $560.00 each
- IC600YB941 (1) used $874.00
- IC600YB943 (1) used $460.00
- IC600YB945 (1) used $310.00
GE Fanuc 660 Series Buss Modules
GE Fanuc Genius Module IC660BBD021T (1) NEW $434
GE Fanuc Genius Module IC660BBD020R (1) NEW $430
GE Fanuc Genius Module IC660BBD024B (1) NEW $584
GE Fanuc Genius Module IC660BBD120 (2) used $180 ea
GE Fanuc Genius Module IC660EBA020M (2) NEW $550 ea
Andrews Machine Works, Email: amw@wildbluecoop.com
