Actuators & Indexers - Linear & Rotary
Camco Cambot - Rotary Indexer with Vertical Lift
Camco Cambot - Rotary Indexer with Vertical Lift
(8) used @ $950.00 each.
#150RPP4H20- .25H20 - 4 stops at 90 degrees and 1/4" lift, Reliance Electric Servo motor LD-3009-L-H00AA 180SM, 10:1 speed reducer.
All of our units also have the optional Camtronics Solid state rotary cam limit switch and a BEI Encoder. Can easily cycle over 100 parts per minute with loads from 1-100 lbs.
(1) used model #150RPP-A103 available
CONTACT AMW REGARDING SHIPPING.
----------------------------------------------------------------------------------------------
Camco #50RGS4H14-180
Camco #50RGS4H14-180 Miniature Shaft Output Roller Gear Series Index Drive. Low Profile, ideal for rotary dials, inline transfer and reciprocating synchronous motion.
The RGS series have larger cams and cam follower bearings than any comparable in the industry. The cam to follower wheel geometry provides large center thru holes for hydraulic, electric or pneumatic lines.
4 Stops, Index period of 180. Bodine Electric 1/8 hsp motor, 1.0A, 130V.
(13) USED @ $450 each. 30 Day Warranty,
Contact AMW regarding shipping.
CAMCO GEAR BOX W/O THE MOTOR
Camco #50RGS4H14-180 WITH OUT THE MOTOR
Output shaft dia: .782, Input shaft dia: .625
Weight 15 lbs.
13 USED @ $300.00 EACH, 30 DAY WARRANTY.
==================================================
INDUSTRIAL DEVICE ELECTRIC CYLINDER
Industrial Devices Electric Cylinder - NH315B-18-MF1-FS2-Q-B3S, 160volt, 2A, includes a H3301B Limit Switch Controller, cable and manual. S/N 9803.
(1 ) New @ $800.00
====================================================
LINEAR STAGES -
AEROTECH ATS02040-6-023 16"T Ball Screw Stage, NEW
(2) New @ $600.00 each, Weight: 24 lbs. 30 day warranty.
16" of travel, 15mm ground ball screw, enclosed bellows. Table 6X6 inch table, (25) 1/4-20 threaded steel inserts on 1" center, end of travel limits, nema 23, overall length: 32" x 6".
Aerotech ATS02005-U-40P ball screw stage w/2" travel, w/motor/encoder, enclosed ballscrew cloth bellows, 7.75" wide 15" long, max load 175 lbs- Weight 17 lbs.
(30) USED in Good condition with motor and encoder @ $350 each.
NEAT Precision Linear Actuator
NEAT Precision Linear Actuator - (3) used @ $100.00 each.
Mfg by New England Affiliated Technologies, 13mm precision ground ball screw and IKO cross rolled guides. 54mm Travel, one revolution moves table 2.5mm. Table measures 4"x4" with 8# 10-32 thread holes, nema 23 motor mount, Input shaft size .25 diameter, 9 pin D connector for end of travel limits. Overall dimensions 5.5" L x 4" W x 2.5" H.
Shipping weight 7 lbs. 30 Day Warranty.
-----------------------------------------------------------------------------------------
NEWPORT M36 Tilt & Rotation Platform, Used
(1) used M36 left @ $150.00
Excellent condition, Light Duty, 30 Day Warranty.
Weight: 2 lbs.
Tilt Range: -4.3 deg to +7 deg. Range: +/- 2.5 deg - Standard Micrometers Load Capacity lb: (N) / 0-20 (0-89). Table: 3" x 3" square. Overall 4 3/8" L x 3" W x 3" H
-------------------------------------------------------------------------------------------------
THK KR3306AFM GUIDED ACUTUATOR 12" TRAVEL, NEW
(1) only NEW @ $600.00. P/N THK 3306AFM+400 LPOK, 1X00-004928. Pitch: one rev. moves table 6.5mm, 6mm diameter: Input shaft, takes nema 17 motor mount. Overall dimensions: 18.5" L x 2.5" W x 2" High.
Weight: 12 lbs (UPS)
BALL SCREW STAGES
Thomson SUPERSLIDE 9" travel, 6x6" table, Vexta Stepping motor PH264-01- 2 phase 1.8 degree step, DC 4V, 1.1A - Weight 25 lbs - UPS only
(1) USED @ $250.00
--------------------------------------------------------------------------------------
Parker Daedal 500000T 4" of Travel Rolled Ball Screw Stage covered
Parker Daedal 500000T 4" of Travel Rolled Ball Screw Stage covered w/ Compumotor CM232AE-00219. Stage P/N 081057002ET, Specs; Guide Shaft Diameter - 13mm, End of travel sensor, Table 8"L x 6 3/4"W, Ball Screw Diameter - 20mm, Ball screw pitch moves the table one revolution ( .50 of an inch) Shaft diameter (.25 of an inch). Aluminum base and cover. Overall Dimensions includes motor 20 1/4".
MOTOR - nema 23, 340 volts, 2.1A, 92 oz-in, also Bendix male/female military type cables available. Weight 31 lbs.
(1) Like new condition @ $385
--------------------------------------------------------------------------------------
Parker Daedal Ball Screw Stage 18" of travel with Vexta PH268-21 motor, used
Price $400.00
Spec's: Pitch: .20 inch, Guide Rail Diameter: .50 inch, Rolled Ball Screw Diameter: .625 inch, 18 inches of travel, 31 inches overall length. Table: 6" X 6" with (8) 1/4-20 threaded steel inserts, Table Height: 3 inches. P/N 5C6181
Weight: 23 lbs Ship UPS only.
---------------------------------------------------------------------------------------
PARKER DAEDAL #606008CTEP 8" TRAVEL PRECISION LINEAR TABLE
PARKER DAEDAL #606008CTEP 8" TRAVEL PRECISION LINEAR TABLE
PARKER DAEDAL #606008CTEP 8" TRAVEL PRECISION LINEAR TABLE
(1) NEW @ $2250.00
Factory refurbished with new cross rollers and rails, new NSR ball screw and ALL new drive bearings. Nema 23 motor block w/ .375 flex coupler. Travel and home sensors with AMP pin connector and lead. Comes with factory calibration report.
30 DAY WARRANTY. Weight: 36 lbs.
Andrews Machine Works, Email: amw@wildbluecoop.com
