Stepper Motors and Drives
Compumotor Stepper Motor SX83-62 .375 double shaft - (1) @ $75.00
Compumotor Stepper Motor USED
S57-102 Stepper motor (6) used @ $96 each
SX57-102 Stepper motor used (1) @ $96
S/SX57-102 Stepper motor used (1) $100
S57-83 Stepper motor (5) used @ $96 each
SX57-83 Stepper motor (1) used @ $96
PK2-57-83 Stepper motor (1) used @ $80
==================================================
Compumotor S83-93-MO Stepper Motor (1) used @ 120.00
Dual shaft, nema 34, motor plug, 9ft cord. Weight 6 lbs.
Compumotor S83-93-MO Stepper Motor (1) used @ $120.00
Single shaft, nema 34, Round 9 pin male end plug. Weight 6 lbs.
=====================================================
Compumotor Zeta 83-93 (1) New @ $300.00
Single shaft, nema 34, motor plug, 9ft cord.
Weight 8 lbs.
Compumotor OS21A-SNFLY 1.8 stepper motor (1) New @ $60
Compumotor CP57-120 stepper motor (1) New @ $150 each.
Compumotor CP57-120 stepper motor (1) used @ $96
Compumotor - Zeta 57-102 Step Motor used (5) @ $96 each
Oriental Motor Vexta
PH264-01 stepper motor 2 phase, 1/8 deg step DC4, 1.1 amp (1) used @ $25
PH264-01B stepper motor 2 phase, 1/8 deg step, DC4, 1.1A, double shaft. (1) used @ $25
PH265-E2.6B stepper motor 2 phase, 1/8" step, DC 2.6A, 0.72 ohms, double shaft. (2) New @ $55 each.
PH266-01-C146 stepper motor 2 phase, 1/8" step, DC 6V, 1.2A (1) used @ $25
PH268-21B, Double shaft. 2phase, 1/8" step, DC 5.4V, 1.5A (1) New @ $55
PH268-21B Double shaft, 2 phase, 1/8" step, DC 5.4V, 1.5A (1) used @ $25.
Compumotor Microstep Drives : USED 30 DAY WARRANTY
(4) used AXL @ $375.00 each,
(5) used LX @ $490.00 each,
(1) used LXL20-P54 @ $490.00,
(10) used S6 @ $384.00 each (NO connector blocks)
Compumotor SX6 Microstep Drive, Used
(1) Used, @ $850.00
30 DAY WARRANTY. Working when removed from service from machines in a cleanroom environment.
SX6 P/N 87-011751-01D, includes power plug, motor plug and connect blocks.
Weight: 12 lbs.
Compumotor Zeta4 Indexer Drive
Compumotor Zeta4 Indexer Drive - used (8) @ $280.00 each.
Includes Indexer plug, and AC power cord. Spec's 95-132 VAC, 50/60 Hz. P/N 87-014030-02A.
30 Day Warranty. Weight 5 lbs.
Compumotor 6250 2 Axis Servo Controller - Repaired by Braas Company September 2000. Passed Bench Test "Paperwork included". S/N 9502020053.
Weight 14 lbs. (1) Repaired @ $574.00.
30 DayWarranty.
Andrews Machine Works, Email: amw@wildbluecoop.com
